Noise Impact Assessment

Our BS4142 noise impact assessment services provide in-depth analysis and evaluation of noise sources and their potential impact on the surrounding environment.

NCSL carries out noise impact assessments for planning applications, new plant and equipment, industrial and commercial developments and changes to existing sites.

The purpose of the assessment is straightforward: establish the existing noise environment, understand the noise associated with the proposal, assess its likely effect at nearby noise-sensitive properties and, where necessary, recommend suitable mitigation.

The assessment method depends on the project. For industrial and commercial sound, this will often include an assessment to BS 4142. Residential developments affected by transport or other existing environmental noise may require a different approach, including consideration of BS 8233 and relevant planning guidance.

When is a Noise Impact Assessment Needed?

A noise assessment is commonly requested as part of a planning application where a development could either introduce a new source of noise close to existing homes or other sensitive premises, or introduce new noise-sensitive development into an existing noisy environment.

Typical projects include new mechanical plant, extraction systems, commercial premises, industrial operations, residential developments and changes to the use or operating hours of an existing site.

The exact requirement should be agreed from the circumstances of the project rather than assuming that the same assessment applies to every site.

BS 4142 Noise Assessments

BS 4142 provides a method for rating and assessing sound from industrial and commercial sources.

Examples include fixed mechanical plant, manufacturing processes, loading activities and other commercial operations.

A BS 4142 assessment normally requires measurement of the existing background sound environment and determination of the sound associated with the proposed or existing source. Characteristics such as tonality, impulsivity or intermittency may also need to be considered.

The assessment is then considered in its proper context rather than relying on a single numerical difference in isolation.

You can read a BS 4142 Case Study here. 

What Does the Survey Involve?

The survey arrangement depends on the site and the question the assessment needs to answer.

We may undertake attended measurements, unattended monitoring over a representative period, or a combination of both. Measurements are normally made at locations selected to represent the nearest or most affected noise-sensitive receptors.

Where the plant or development does not yet exist, manufacturer data, measured source data or acoustic modelling may be used alongside the site survey to predict future noise levels.

From Measurement to Practical Advice

A useful noise report should do more than present measured levels.

Where mitigation is required, we aim to identify practical ways of achieving the necessary reduction. Depending on the source, this might involve plant selection, silencers, acoustic enclosures, barriers, screening, vibration isolation, operating restrictions or changes to the site layout.

Our background in noise and vibration control means that this part of the assessment is based on engineering practicality as well as compliance. 

Noise Assessments for Residential Development

Where a residential development is proposed close to roads, railways, commercial premises or other existing noise sources, the assessment has a different purpose.

In these cases we can measure the existing noise climate and assess the suitability of the site and building envelope, including glazing and ventilation requirements where appropriate. You can read more about this on our environmental noise page. 

What You Receive

Our report will normally set out:


• The survey methodology and measurement locations;
• Measured noise levels;
• Relevant assessment criteria;
• Calculations or predictions where required;
• The resulting assessment;
• Recommended mitigation, where necessary; and
• A clear conclusion suitable for the intended planning or design purpose.

Discuss Your Project

If you have a planning condition, planning officer’s request, plant schedule or site layout, send it to us. We can normally tell you quite quickly what type of survey is required and what information we need to quote.

Contact Our Noise Consultants

Contact NCSL for more information on noise surveys & impact assessments.